سلام، مهمان
09-18-2019، 08:00 AM
How Long Does a Shock Absorber Last?
Your car has a suspension system that provides dampening of shocks and jarring while driving on the road. The suspension also helps improve vehicle handling. There are many different types of suspension systems out there, but the most common by far is a combination of shock absorbers and struts. On older cars, shock absorbers are used on both the front and rear wheels, but modern cars use them primarily on the rear wheels, with strut assemblies on the front.
Both shocks and struts work in a similar way. They use either compressed gas or liquid to help absorb the lateral (up and down) movement of your car caused by bumps, dips, speed bumps, potholes and more. Your shock absorbers are in use any time the car is moving (and even when it’s not). That means they’re subjected to a lot of wear and tear, and they will eventually fail. In fact, they’re considered a normal maintenance item, and they should be replaced relatively regularly. You should also have your shocks and struts inspected at each oil change.
In general, a shock absorber should last at least 50,000 miles before you need to have it replaced. However, the real determining factor is where you drive and how you drive. For instance, if you do a lot of off-road driving, or spend a lot of time on dirt roads, your shocks will wear out much more quickly. If you do primarily highway or interstate driving where the roads are smooth and level, they may last well beyond the 50,000-mile mark.
Once your shocks begin to wear, they’ll fail quickly. What happens is that the end seals begin to wear. Eventually, they will fail. The gas or liquid inside the shock absorber will then leak out. In a liquid-based shock, this can be seen as moisture on the top of the shock absorber or running down the side of the assembly.
Because your car’s shock absorbers have such a dramatic role to play in handling and comfort, it’s important to know the signs that indicate you have a failing or failed shock. These include:
Knocking or bumping from the rear suspension
Vehicle does not sit level
Feeling that the rear end is “loose” while going around turns
The rear end bounces more than it should
Jarring ride over rougher roads
Even small bumps are very noticeable
If you think your shocks are in need of attention, Your Mechanic can help. One of our mobile mechanics will come to your location, inspect each shock absorber and replace them if needed.
OUR PRODUCTS SPECIFICATION
KOOBER NO.MANUFACTURERMODELYEARPOSITIONOEM NO.KYB NO.
73004912HONDAACCORD－CD#，CE#93/09-98FR51601SV4J12
51601SV4922
51605SV4A02
51605SV4J02 341174
73004911HONDAACCORD－CD#，CE#93/09-98FL51602SV4J12
51602SV4922
51606SV4A02
51606SV4J02 341175
73004920HONDAACCORD－CD#,CE#93/09-98R52611SM5A14
52610SV5J02
52611SV4A02
52611SV4J02 341176
●Warranty: 1 year
●Material: Rubber, Steel
●Color: Black or as your request
●MOQ: 50PCS
●Spring Type: Coil Spring
●Spring Material: Steel
●Shock Absorber Type: Gas-Filled
PRODUCTS DETAILS
1, The weld: Use of robot welding, equipped with Matsushita automatic welding machine and 1.5MM wire, to ensure consistency 、aesthetics of welding, welding depth of 1.5mm, pull force ≥ 45KN.
2, NOK oil seal: Use of Japan NOK oil seal, NOK oil seal is the industry's highest quality oil seal, the use of natural high-quality (NBR) production, effectively suppress the shock absorber oil leak, abnormal sound; tolerance temperature -45 ℃ -120 ℃ , Inflatable pressure reached 3MPa
3，Connecting rod: Degree of finish ≤ 0.05, chrome layer thickness ≥0.02, quenching depth 1-1.5, quenching hardness Rockwell HRC50-55; chrome layer Vickers hardness HV900-HV1300, piston end beating ≤ 0.03, micro-crack evenly distributed
4, Electrophoretic paint: Use of electrophoretic coating, film thickness 0.04-0.06, salt spray test ≥ 480 hours, the appearance of high finish, without any dead ends.
PRODUCTS FEATURE
1)All weather fluid
2) Hard chromed piston rod reduces friction
3) Seamless cylinder reduces possibility of splitting
4) High-Pressure Nitrogen Gas
5)Quality contral system certified by ISO/TS16949
FAQ
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
Q3. What is your terms of delivery?
A: FOB, CFR, CIF,
Q4: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.HONDA Shock Absorber manufacturers
website:http://www.shockabsorbercn.com/automobile-shock-absorbers/honda-shock-absorber/
Your car has a suspension system that provides dampening of shocks and jarring while driving on the road. The suspension also helps improve vehicle handling. There are many different types of suspension systems out there, but the most common by far is a combination of shock absorbers and struts. On older cars, shock absorbers are used on both the front and rear wheels, but modern cars use them primarily on the rear wheels, with strut assemblies on the front.
Both shocks and struts work in a similar way. They use either compressed gas or liquid to help absorb the lateral (up and down) movement of your car caused by bumps, dips, speed bumps, potholes and more. Your shock absorbers are in use any time the car is moving (and even when it’s not). That means they’re subjected to a lot of wear and tear, and they will eventually fail. In fact, they’re considered a normal maintenance item, and they should be replaced relatively regularly. You should also have your shocks and struts inspected at each oil change.
In general, a shock absorber should last at least 50,000 miles before you need to have it replaced. However, the real determining factor is where you drive and how you drive. For instance, if you do a lot of off-road driving, or spend a lot of time on dirt roads, your shocks will wear out much more quickly. If you do primarily highway or interstate driving where the roads are smooth and level, they may last well beyond the 50,000-mile mark.
Once your shocks begin to wear, they’ll fail quickly. What happens is that the end seals begin to wear. Eventually, they will fail. The gas or liquid inside the shock absorber will then leak out. In a liquid-based shock, this can be seen as moisture on the top of the shock absorber or running down the side of the assembly.
Because your car’s shock absorbers have such a dramatic role to play in handling and comfort, it’s important to know the signs that indicate you have a failing or failed shock. These include:
Knocking or bumping from the rear suspension
Vehicle does not sit level
Feeling that the rear end is “loose” while going around turns
The rear end bounces more than it should
Jarring ride over rougher roads
Even small bumps are very noticeable
If you think your shocks are in need of attention, Your Mechanic can help. One of our mobile mechanics will come to your location, inspect each shock absorber and replace them if needed.
OUR PRODUCTS SPECIFICATION
KOOBER NO.MANUFACTURERMODELYEARPOSITIONOEM NO.KYB NO.
73004912HONDAACCORD－CD#，CE#93/09-98FR51601SV4J12
51601SV4922
51605SV4A02
51605SV4J02 341174
73004911HONDAACCORD－CD#，CE#93/09-98FL51602SV4J12
51602SV4922
51606SV4A02
51606SV4J02 341175
73004920HONDAACCORD－CD#,CE#93/09-98R52611SM5A14
52610SV5J02
52611SV4A02
52611SV4J02 341176
●Warranty: 1 year
●Material: Rubber, Steel
●Color: Black or as your request
●MOQ: 50PCS
●Spring Type: Coil Spring
●Spring Material: Steel
●Shock Absorber Type: Gas-Filled
PRODUCTS DETAILS
1, The weld: Use of robot welding, equipped with Matsushita automatic welding machine and 1.5MM wire, to ensure consistency 、aesthetics of welding, welding depth of 1.5mm, pull force ≥ 45KN.
2, NOK oil seal: Use of Japan NOK oil seal, NOK oil seal is the industry's highest quality oil seal, the use of natural high-quality (NBR) production, effectively suppress the shock absorber oil leak, abnormal sound; tolerance temperature -45 ℃ -120 ℃ , Inflatable pressure reached 3MPa
3，Connecting rod: Degree of finish ≤ 0.05, chrome layer thickness ≥0.02, quenching depth 1-1.5, quenching hardness Rockwell HRC50-55; chrome layer Vickers hardness HV900-HV1300, piston end beating ≤ 0.03, micro-crack evenly distributed
4, Electrophoretic paint: Use of electrophoretic coating, film thickness 0.04-0.06, salt spray test ≥ 480 hours, the appearance of high finish, without any dead ends.
PRODUCTS FEATURE
1)All weather fluid
2) Hard chromed piston rod reduces friction
3) Seamless cylinder reduces possibility of splitting
4) High-Pressure Nitrogen Gas
5)Quality contral system certified by ISO/TS16949
FAQ
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
Q3. What is your terms of delivery?
A: FOB, CFR, CIF,
Q4: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.HONDA Shock Absorber manufacturers
website:http://www.shockabsorbercn.com/automobile-shock-absorbers/honda-shock-absorber/
